| 3 x | *Lacing Cord Kit (2) Rolls & (1) Needle) |
| 3 x | *Lacing Cord (25 Rolls) $5.65/Roll |
| 3 x | *Lacing Cord, (100 Rolls) $5.35/Roll |
| 3 x | No-Oxide Grease, 8 oz. Tube |
| 6 x | *Lacing Cord (1 Roll), Waxed Poly, 9 Ply (195 yds) |
| 5 x | *Lacing Cord (10 Rolls) $5.95/Roll |
| 5 x | *145- P, Fiber Tag, 1-3/4" x 1" (PKG 1,000) Same as $24/100 |
| 3 x | BATTERY CLEANING KIT |
| 3 x | No-Oxide Grease, 2 oz. Plastic Jar |
| 3 x | *Lacing Needle (Curved) |
| 6 x | *145- P, Fiber Tag, 1-3/4" W x 1"H (PKG 100) |
| 3 x | *Lacing Needle (Heavy Duty) Orange w/ Green Blade |
| 3 x | Tape, Vinyl Electrical, 3/4" x 60', 7 mil (Gray), PKG 5 |
| 3 x | Tape, Vinyl Electrical, 3/4" x 60', 7 mil (Black), PKG 5 |
| 1 x | T&B Cable Tie, 14.5", 50 lb, Natural (Pkg 100) |
| 1 x | Morris Cable Tie, 4", 18 lb, Natural (Pkg 100) |
| 1 x | Cable Tie, Marker, 5" Long w/ .79" X 1.10" Tab (Pkg 100) |
| 1 x | Burndy Cable Tie, 15.5", 50 lb, Natural (Pkg 100) |
| 1 x | Burndy Cable Tie, 11.75", 50 lb, Natural (Pkg 100) |
| 1 x | Burndy Cable Tie, 4", 18 lb, Natural (Pkg 100) |
| 1 x | Morris Cable Tie, 14.5", 50 lb, Black (Pkg 100) |
| 1 x | Burndy Cable Tie, 8", 50 lb, Natural (Pkg 100) |
| 1 x | Burndy Cable Tie, 8", 50 lb, Black (Pkg 100) |
| 1 x | Morris Cable Tie Gun, Molded Nylon, .189" Max Tie Width |
| 1 x | Panduit Cable Tie, 7.4" Long, PKG 100 |
| 1 x | TPA Fuse, 15 Amp, Telpower |
| 1 x | TPA Fuse, 20 Amp, Telpower |
| 2 x | Pencil Drawing Kit |
| 2 x | Labeling Tape, 1/2" Black on White |
| 2 x | Panduit Label Dispenser and Marker, 1" X 3/4", 100 Pk Labels |
| 2 x | Labeling Tape, 1" Black on White |
| 2 x | Labeling Tape, 3/4" Black on White |
| 2 x | Labeling Tape, 3/4", Blue on White |
| 2 x | Sharpie Fine-Point Permanent Marker |
| 2 x | Labeling Tape, 1/4" Black on Clear |
| 2 x | Labeling Tape, 1/2" Black on Clear |
| 2 x | Labeling Tape, 3/4", Red on White |
| 2 x | V-Bolt Kit, 9 X 5/8-11 |
| 2 x | Splice Parallel Aux Frame Bar, 1-1/2" (68 LEFT) |
| 2 x | Supt 1-1/2? or 2? Aux Bar X-Over w/ Thrd Rod (830 LEFT) |
| 2 x | Splice Kit, 2 Hole for Framing Chnl (470 LEFT) |
| 2 x | Side Bar Hanger Bracket, G-Type, 1-1/2" (1,900 LEFT) |
| 2 x | Supt Ca Rack w/ Slotted Bkt 1-1/2" SB (Both Sides) (2,500 LEFT) |
| 2 x | Supt Ca Rack w/ Slotted Bkt 2" SB (Both Sides) (1,500 LEFT) |
| 2 x | Snap-on Horizontal Cable Ring (1,200 LEFT) |
| 2 x | Screw, HH Lag 3/8-16 X 3" (600 LEFT) |
| 2 x | Square Washer, 2" X 2" X 3/8" (11/16" Hole) YZ (1,800 LEFT) |
| 2 x | V-Bolt, 5" X 1/2-13 (337 LEFT) |
| 2 x | V-Bolt, 8" X 1/2-13 (247 LEFT) |
| 2 x | V-Bolt, 3 X 3/8-16 (480 LEFT) |
| 2 x | V-Bolt, 4 X 3/8-16 (663 LEFT) |
| 2 x | V-Bolt Kit, 2 Pc, 4" w/ Plates (42 LEFT) |
| 2 x | Wire Horn Bracket, 1-1/2" (400 LEFT) |
| 2 x | Wire Horn Kit, Off-Set 1-1/2" Side Bar, 8" H, Each (3,088 LEFT) |
| 2 x | Splice Kit, Auxiliary Framing 1-1/2" Bar, 3-Hole (446 LEFT) |
| 2 x | Splice, 3 Hole for Channel w/ Carriage Bolts (49 LEFT) |
| 1 x | 4 AN, Uninsul Ring, One Hole, (1/4" Stud) FLEX (ONLY 117LEFT) |
| 1 x | KTK 25 Amp Fuse |
| 1 x | KTK 15 Amp Fuse |
| 1 x | KTK 20 Amp Fuse |
| 1 x | Guide or Retainer for NBI Cable Duct, Blue (325 LEFT) |
| 1 x | Dual-feed 10/10, GMT Fuse Panel, Black (1 LEFT) *REFURB* |
| 1 x | H-Tap Insul Cover (6"L x 1-3/4"T x 2-3/4"W) |
| 1 x | H-Tap Insul Cover (7"L x 2-3/8"T x 3-7/8"W) |
| 1 x | Front Cross-Connect Module, 3-Port (500+ LEFT) *REFURB* |
| 1 x | Junction Plate for NBI to End Cover (5" X 2-1/2") (800 LEFT) |
| 1 x | Isolate Cable Rack from Aux Bar (39 LEFT) |
| 1 x | Hilti, Anchor, 7/8-9 X 4-1/2" L, Pair (376 LEFT) |
| 1 x | Hilti, Anchor, Expansion 5/8-11 X 5-1/2", Pair (395 LEFT) |
| 1 x | Hilti Anchor Kit, HSLG #6 (652 LEFT) |
| 1 x | Expansion Shield, 3/8" X 3" (600 LEFT) |
| 1 x | Expansion Shield, 3/8" X 2" (500 LEFT) |
| 1 x | Junctioning 1-1/2" Side Bars, Inline (Pair) (2,300 LEFT) |
| 1 x | End Close Bar for 12" Tubular Rack, 1-1/2" SB (71 LEFT) |
| 1 x | Hanging Bracket, 1/2" (900 LEFT) |
| 1 x | Hilti T-Separator Bar, CP675 |
| 1 x | Hilti Z-Wall Frame, CP675 |
| 1 x | Floor Anchor Plate for UEF Bay, Each (306 LEFT) |
| 2 x | Splice Kit, Auxiliary Framing 2" Bar, 3-Hole (383 LEFT) |
| 1 x | KTK 30 Amp Fuse |
| 1 x | TPA Fuse, 40 Amp, Telpower |
| 1 x | TPA Fuse, 10 Amp, Telpower |
| 1 x | TPA Fuse, 50 Amp, Telpower |
| 1 x | TPA Fuse, 30 Amp, Telpower |
| 1 x | TPA Fuse, 5 Amp, Telpower |
| 1 x | TPA Fuse, 25 Amp, Telpower |
| 1 x | Morris Cable Tie, 4", 18 lb, Black (Pkg 100) |
| 3 x | Threaded Rod, 5/8-11, 12" Long, Yellow Zinc |
| 3 x | End Cap for Threaded Rod, 5/8" (Pk of 10) |
| 3 x | End Cap for Threaded Rod, 1/2" (Pk of 10) |
| 3 x | Threaded Rod, 5/8-11, 6' Long, Yellow Zinc |
| 3 x | Threaded Rod, 1/2-13 X 18" Long, Yellow Zinc |
| 3 x | Threaded Rod, 1/2-13, 6' Long, Yellow Zinc |
| 3 x | Split Tubing for Threaded Rod, PVC (4'L) |
| 3 x | Split Tubing for Threaded Rod, PVC (6'L) |
| 1 x | NetVanta 3305 Router T1/FT1 NTWK (e/w 1200864L1) 1 LEFT |
| 1 x | Power Ca Bracket (for BAR CH) 6" X 3-3/4" X 1", Gray (750 LEFT) |
| 1 x | Rigid Splice for Seismic Ch (9?X1-1/2?X1-3/8?) (60 LEFT) |
| 1 x | Parallel Framing Clip, 3/8"H for 1-1/2" SB (700 LEFT) |
| 1 x | Parallel Framing Clip, 5/8"H for 1-1/2" SB (1,900 LEFT) |
| 1 x | Parallel Framing Clip, 3/8"H for 2" SB (950 LEFT) |
| 1 x | Rigid Inline Splice w/ Continuity (37 LEFT) |
| 1 x | Screw, HH Lag 3/8-16 X 1-1/2" (1,600 LEFT) |
| 1 x | Screw, HH Lag 3/8-16 X 2-1/2" (1,200 LEFT) |
| 1 x | Power Cable Signal Bracket, 2" (106 LEFT) |
| 1 x | Power Cable Brkt, Double, 6-1/2"X5-1/2", 1-1/2" SB (527 LEFT) |
| 1 x | NetVanta 3305 Router T1/FT1 NTWK (e/w 1200862L1) 1 LEFT |
| 3 x | 145- P Flame Retardant Double-Sided Labels (Roll of 100) |
| 3 x | 145- P Fiber Tag, Large (WHITE) 1-3/4" W x 1"H (PKG 25) |
| 3 x | 145- P Fiber Tag Kit (White) w/ Labels, 1-3/4" W x 1"H for AT&T |
| 3 x | 145-G, Fiber Tag (Oval) 1-3/8"W x 1"H (PKG 1000) |
| 3 x | 145-G, Fiber Tag (Oval) 1-3/8"W x 1"H (PKG 500) |
| 3 x | Brass, Do Not Disconnect, Tag |
| 3 x | 145-G, Fiber Tag (Oval) 1-3/8"W x 1"H (PKG 100) |
| 3 x | 145- P Fiber Tag, Large (WHITE) 1-3/4" W x 1"H (PKG 100) |
| 3 x | *FIBER TAG KIT (200 Tags + 1 Lacing Cord) |
| 3 x | *FIBER TAG KIT (100 Tags + 2 Lacing Cord + 1 Needle) |
| 3 x | *145- P, Fiber Tag, 1-3/4" x 1" (PKG 2,000) Same as $22/100 |
| 3 x | Threaded Rod, 5/8-11, 4' Long, Yellow Zinc |
| 3 x | Threaded Rod, 5/8-11, 2' Long, Yellow Zinc |
| 1 x | Heat Shrink, Black, 3/8" Diameter, Per Foot (6-4 AWG) |
| 1 x | Heat Shrink, Black, 2" Diameter, Per Foot (800-1000 MCM) |
| 1 x | Heat Shrink, Black, 1/4" Diameter, per Foot (12-8 AWG) |
| 1 x | Heat Shrink, Black, 1-1/2" Diameter, Per Foot (350MCM-750 MCM) |
| 1 x | Heat Shrink, Black, 3/4" Diameter, Per Foot (1/0-3/0 AWG) |
| 1 x | Heat Shrink, Black, 1/2" Diameter, per Foot (4-1 AWG) |
| 1 x | Heat Shrink, Black, 1" Diameter, Per Foot (4/0-300 MCM) |
| 1 x | Heat Shrink, Clear, 3/8" Dia (#6-#4 AWG) Per Foot |
| 1 x | Heat Shrink, Clear, 3/4" Diameter, (1/0-3/0 AWG) Per Foot |
| 1 x | Heat Shrink, Clear, 2" Diameter, (800-1,000 MCM) Per Foot |
| 1 x | Heat Shrink, Clear, 1/8" Diameter, (#16-#14 AWG) Per Foot |
| 1 x | Heat Shrink, Clear, 1/4" Diameter, (#12-#8 AWG) Per Foot |
| 1 x | Heat Shrink, Clear, 1/2" Diameter, (#4-#1 AWG) Per Foot |
| 1 x | Heat Shrink, Clear, 1-1/2" Diameter, (350-750 MCM) Per Foot |
| 1 x | Heat Shrink, Clear, 1" Diameter, (3/0-4/0 AWG) per Foot |
| 1 x | Heat Shrink End Cap, #8 AWG - #6 AWG |
| 1 x | Heat Shrink End Cap, 250 AWG - 600MCM (ONLY 2 LEFT) |
| 1 x | Heat Shrink End Cap, 2/0 AWG - 350MCM (6 LEFT) |
| 1 x | Heavy Wall Heat Shrink End Cap, 1/0 - 500MCM, 5/PK |
| 1 x | Heavy Wall Heat Shrink End Cap, #8 - #1, 10/PK |
| 1 x | Silicon Bronze Kit, 3/8" X 1-1/2" |
| 1 x | Bolt Kit, 1/4-20 X 1-1/2", Stainless Steel |
| 1 x | Bolt Kit, 1/4-20 X 1", Stainless Steel |
| 1 x | Bolt Kit, 3/8-16 X 1-1/2", Stainless Steel |
 |
| $10,241.57 |
1.jpg "Ckt Brkr, 20 AMP, Alarm Tripped, Bullet-Type, Black")
.JPG "Ckt Brkr, 40 AMP, Alarm Tripped, Stud-Type, Black (3 Left)")
